Found 68 search results for keyword: kuhn

Apr 15

Kuhn Profile Pack v1.0

Kuhn Profile Pack v1.0

Description:
Hello Com,
because I own the game Futtermischwagen was too small for larger dairy farms, I once browsed a bit on the Kuhn-web and found the large, three-axis mixer feeders of the Euromix series. So I put me time range, and a bit of tinkering from the Profiles mixer what. Originally, this caused a three-axis mixer feeders. But when I built so came one to the other and in the end there were 3 different then.
A profile 2880C with two axles and three augers and 28000 liters
A profile 3580C with three axes and three augers and 35000 liters
A profile 4280C with three axes and three augers and 42000 liters
All have front and rear a feed discharge. Of course, with adapted Parti Celan Imation. And I’ve also increases the immersion equal loading times accordingly. All besitzten lighting and of course washable. In addition, all steering axles and suspension chassis got. The prices are on the website Kuhn and correspond to reality.
Hope you have fun with it and they can really use. LOG is naturally clean and can be loaded the fruits and the original can load profiles in the same ratio.
Have fun with it
MFG fitter 1

Download: Kuhn Profile Pack v1.0 [Uploaded.to]

Apr 01

Placeable Carwash

Placeable Carwash

Description:
Hi LS community
here I have a placeable wash for you.

NOTE: requires large area!

With this you can wash your vehicle without Kärcher. Washing process takes about 1 minute. Prices vary depending on number of contaminated equipment, degree of soiling and cleaning speed set in the vehicle.xml (but are quite realistic)

The mod has a relatively realistic animation (traffic lights, gates, washing brushes, sound and particles).

On entering the hall up to the front of the washing machine, animation and cleaning starts.

The mod has been tested in single player as well as multiplayer with various vehicles and always worked flawlessly.

Vehicles can be washed up to a length of 20 m. Height limit 4.20 m and width restriction about 4 m.

Until now I have not found any vehicle, whether standard or Mod, which doesn’t fit in the car wash. Even the CASE IH AXIAL-FLOW 9230 inclusive 3162 DRAPER 45FT still fits on the length, if you drive through up to front.

Even large appliances such as Kuhn FC and Horsch Pronto 10030 and Maestro are not a problem.

For the reapers an extra cleaning point is available, where you can clean them automatically. (put Cutter on shelf, drive vehicle away, go to the Control Panel, “O” key and the washing process begins after cleaning stop with “O” and the price will be deducted from the account).

The hall is illuminated at night.

The washing procedure in the hall only works if you drive in by the ENTRY, so enter the wrong way does not work.

Since there is no PDA icon for washing in the game, I think at least, I put additionally roadsign into the mod with bilateral labeling to indicate the way to the car wash.

The area where the plant is located, should be reasonably flat, because it can be quite steep else.

I hope I have not forgotten essential.

CREDITS

Mod name: placeableCarwash

Authors: 112TEC | schwaki

Date: 03/2015

——————————–

Model washing machine: basic model Internet Fund

Traffic sign: partially Nick98_1

Rest: DIY 112TEC | schwaki

Script: 112TEC | schwaki (wash formulas based and UPK Mod of MOR2000)

Animation and Ingaming: 112TEC | schwaki

——————————–

For me, the log is error-free!

Have fun with it!

1. Publication only with original download link. NOT a substitute Link

2. No publication Neutexturierung, model change or parts of the mods.

Releases I reserve on request.

Download: Placeable Carwash [Uploaded.to]

Mar 25

Kuhn Feeders 5 Pack Updated v1.1

Kuhn Feeders 5 Pack Updated v1.1

Description:
Kuhn Quad Feeder Pack V1.1, 21.7mb zip for all 5 machines.

V1.1 changes.
Added the ability for them to be filled from the Mixstaion in the Ringswoods1.4 Map. The Primor has been tweaked a little more as I was still finding loading it a little tricky. Added a yellow SPV Modified.

Kuhn SPV Standard capacity and motor specs with, dyeable wheels, field tyres and tracks, dual rear hitches and PTO, Washable and Multiplayer YES, Price 75000 to buy. Standard Version is weak at pulling trailors.

Kuhn SPV Modified Power, 60000 capacity, 400ltr fuel tank, 45 degree steering road speed limited to 48kmh, dyeable wheels, field tyres and tracks, dual rear hitches and PTO, Washable and Multiplayer YES, Price 75000 to buy.

Kuhn Primor, rebuilt to be longer, wider and easier to load bales. Dyeable wheels, washable and multiplayer. 10000 to buy.

Kuhn Profile, Dyeable wheels, 30000 capacity.

All have brighter HDR body textures and no errors.

Download: Kuhn Feeders 5 Pack Updated v1.1 [Uploaded.to]

Mar 23

Kuhn Quad Feeder Pack v1.0

Kuhn Quad Feeder Pack v1.0

Description:
Kuhn Quad Feeder Pack V1.0, 18.7mb zip for all 4 machines.

Kuhn SPV Standard capacity and motor specs with, dyeable wheels, field tyres and tracks, dual rear hitches and PTO, Washable and Multiplayer YES, Price 75000 to buy. Standard Version is weak at pulling trailors.

Kuhn SPV Modified Power, 60000 capacity, 400ltr fuel tank, 45 degree steering road speed limited to 48kmh, dyeable wheels, field tyres and tracks, dual rear hitches and PTO, Washable and Multiplayer YES, Price 75000 to buy.

Kuhn Primor, rebuilt to be longer, wider and easier to load bales. Dyeable wheels, washable and multiplayer. 10000 to buy.

Kuhn Profile, Dyeable wheels, 30000 capacity.

All have brighter HDR body textures and no errors.

Download: Kuhn Quad Feeder Pack v1.0 [Uploaded.to]

Mar 10

Papenburg Forever v1.2

Papenburg Forever v1.2

Description:
Dear Modgemeinde.
After about 2 months of construction, fummel and test work I want to introduce you a new map.
It is not completely new but united in Papenburg Map Papenburg with the North Bokel. The rest of the map I gestalltet idividuell. It has also maintained a slight hill Lieger some detail. The parts I will expand on the time.
It therefore is a 4 fold map. I have some big dispensed layer trees. Which are only here and there on the edge
The map is planted to 97% precipitable with trees.
Equal first the map is not necessarily what weak computer. But my tester did not complain so they should run well on moderate calculators.
My system for reference: Intel i7 4970K 8GB / Ram 1600 / Geforce GTX 770 2GB Ram / Win 7 64 bit
But the pudding is in the eating.
As a result, I have merged 2 maps and have installed mods and eitliche building has grown to about 490MB the zip. Especially the trees eat a lot of space in the i3d the shapes, the playing sind.Das grown to over 100 MB of performance and load times but technically not a big role.
So we go into detail

-4 Times map with 95 arable land and about 20 meadows
and pig. BGA.Mistlager of BGA
– All dunghill with conveyor belts
– Wool pallets Collector (with auto sale)
– (Can load Sähmaschinenmüssen seeds2) Seedmaster for the production of seed (Pack included)
Kalksilos to kalkkaufen of different stand put on the map (courtyard, harbor, Raiffeisen)
– 5 manure storage
– A wide end farm buildings (usually twice) 2 butchers, 2 biomass heating plants, 1 Raiffeisen mill, 2 Raiffeisen markets, 2 grain storage, etc.
– Slurry, manure, lime mod Wassermod, Choppedstraw
– Fruit varieties: wheat, barley, canola, corn, grass, beets, potatoes, clover, alfalfa (Multi Fruit modules are included)
– 2 large external Biiogasanlagen
– Surfaces 1-40 hectares

Function grass and corn silos (Chaff):
The silos can do both. For this purpose, you should her fahrsiloextension nutzen.Lest through you what it says. There is only grass or corn silos. You will even remember what go where gehört.Grasilos take only grass and corn silos only maize (chaff) and potatoes (see below)

Even after proofing can see by the color of what grass (dark) or maize (chaff) (light) ist.Das can then very easily using the Mixer feeders (Kuhn) or blade (can record must grass) .And be taken either directly fed or processed at 50% 50% oder60% / 40% or 40% / 60% mixture of compound feedingstuffs werden.Bei addition of 10-20% of potatoes in ensiling can also be removed after fermentation direct compound feed.

Other FAQ and other explanations follow in the next few days.
Known errors and problems

Download: Papenburg Forever v1.2 [Uploaded.to]

Jan 06

Kuhn SPV Confort Fedder v1.0

Kuhn SPV Confort Fedder v1.0

Description:
Kuhn SPV Confort, minor changes are: 60000 capacity load, 2000lts per second fill rate, wider wheels and tyres, brighter red colour skin with red mudflap and mirror trim, red drivers seat inside. Washable YES, Multiplayer YES. 65000 to buy and 25 daily cost’s.

Download: Kuhn SPV Confort Fedder v1.0 [Uploaded.to]

Jan 05

Kuhn GA 8512 S v1.1

Kuhn GA 8512 S v1.1

Description:
The new KUHN Gyrorakes set new standards of performance surface, ground hugging and Lebensdauer.Eine clean and gentle swath working for an energy-rich plume Futter.Beim to the loss of leaf units will be avoided, as the dirt brought into Futter.Dies all, the new Kuhn GA 8521SBy Claas_Evolution & Modding World
Washable Larger tires / wheels drive shafts / Direct shaft rotates tire tracks tire dust New PS added a new selection scheme New Store New Store image description
Zip: 13.9 mb Working width: 8.2 meters Price: € 45 700 Upkeep: 110 / day Required PS: 90

grass_windrow
dryGrass_windrow
wheat_windrow
barley_windrow

Original: Giants Software
Tag: LS13: // Acert LS15 Claas_Evolution feat. Modding World
Thank you for yet taken place in LS13 release of Acert
Various Fixes: IFKO [coordinator]
Scripts: Manuel Leithner / Desperados93

Download: Kuhn GA 8512 S v1.1 [Uploaded.to]

Jan 02

New Holland T832 EvoXtreme 620 V1.12 Fix

New Holland T832 EvoXtreme 620 V1.12 Fix

Description:
V1.12 this verion has 3 small log fixes, The attatcher 0 log error, The Dirt Normal path fix and the store width to 2^n log errors. Thanks to whoever guest is for pointing the attacher error which shows only in DEV mode. I’m aware that this applies to the other EvoX T8’s and will fix them shortly.

Ok Folks this is what I suppose the EVO tractor was leading upto. Enjoy here on MODHUB.

As Requested.

This has a custom rear hub that you can see between the rear wheels. Each rear wheel is independently Dynamically loaded and has tyre tracks, particles, It’s own full range of settings just the same as the original 2 rear wheels. You will see the differential effects working between them when tight turning. No messy code or errors.

Introducing the New Holland T8320 620EvoX with the motor specs from the T9.565 producing 620+ BHP. This was based on the old EVO600 but as requested a rear high implement attacher has been fitted. The glitch when working with the Kuhn tedder not reaching operating height is fixed. Tested with all other implements and trailers ok.

EvoXteme V1.11. 95000 to buy, 95 Daily cost’s, Dyeable wheel colours, Washable Yes, Multiplayer Yes. Road Speed restricted Yes 61KMH, Wider front tyres and fenders. Fender rotation increased when steering, Rear Tyre radius reduced from the original EVO. All Rear arms and attacher heights have been modified for all implements to work as they should. Brakes, RPM, torque, suspension and steering settings have been modified from the original Evo.

Download: New Holland T832 EvoXtreme 620 V1.12 Fix [Uploaded.to]

Jan 02

New Holland T832 EvoXtreme 620 V1.11

New Holland T832 EvoXtreme 620 V1.11

Description:
This has a custom rear hub that you can see between the rear wheels. Each rear wheel is independently Dynamically loaded and has tyre tracks, particles, It’s own full range of settings just the same as the original 2 rear wheels. You will see the differential effects working between them when tight turning. No messy code or errors.

Introducing the New Holland T8320 620EvoX with the motor specs from the T9.565 producing 620+ BHP. This was based on the old EVO600 but as requested a rear high implement attacher has been fitted. The glitch when working with the Kuhn tedder not reaching operating height is fixed. Tested with all other implements and trailers ok.

EvoXteme V1.11. 95000 to buy, 95 Daily cost’s, Dyeable wheel colours, Washable Yes, Multiplayer Yes. Road Speed restricted Yes 61KMH, Wider front tyres and fenders. Fender rotation increased when steering, Rear Tyre radius reduced from the original EVO. All Rear arms and attacher heights have been modified for all implements to work as they should. Brakes, RPM, torque, suspension and steering settings have been modified from the original Evo.

Download: New Holland T832 EvoXtreme 620 V1.11 [Uploaded.to]

Jan 02

Kuhn GA852 Windrower v1.0

Kuhn GA852 Windrower v1.0

Description:
Standard Kuhn GA852 Windrower with increased operating speed of 22kmh. Multiplayer Yes, Washable Yes. Price 8000 and 10 daily cost’s.

Download: Kuhn GA852 Windrower v1.0 [Uploaded.to]

Page 1 of 712345...Last »