This is blueweb’s base Idaho_USA_v1_1 map with the SoilMod added to it.
Unzip the downloaded file and put the 7 zip files in your mods folder. This is all the required files for the SoilMod to work. You should visit the below links to learn what the SoilMod does and how to use it. The included map file in this download has all the steps completed to install the SoilMod and it has been tested and verified to be working. Test Setup was an empty mods folder execpt these 7 zip files. There were no errors generated in the logfile.txt after running the map through several growth cycles.
Welcome to Idaho, USA. The farmland here is rich and fertile! This map has all of the main fruits with the addition of oats and soybeans. There are two main farms. One is centralized, more modern and is where dairy cattle are located. The second farm is a bit older and is where you will find all other livestock. There are sheep, chickens, pig and cattle fattening. The livestock farm also contains silo storage for all crops. These silos are not shared with the main farm, so storage on both farms is separate. This means running two different farms as a single player or splitting the farms if playing with a friend.
The stave silos found at both farms are functional. They create silage at a certain amount per hour. You can fill them via their augers and they have level indicator pipes to see fill levels. The garage doors on the farm buildings are functional. Some are automatic and some manual. For the manual doors, approach them on the right side and you will see an indicator in the bottom right of the screen. Pushing “O” will then open the door. The same for closing them. The storage silos at both farms are “All In One”. This means there is only 1 point for loading up your stored grains. When you drive under the overhead silos, you will see an indicator in the main upper left window.